• PhatDad RC Carving Blocks/ Camber gain blocks for the HPI Baja 5B/5T/5SC

PhatDad RC Carving Blocks/Camber gain blocks for HPI Baja 5B/5T/5SC

 
 

 

"Carving Blocks", they give you the sharper edge to whittle away at the competition! Racer developed, and competition tested.

The part enhances CAMBER GAIN, by adjusting the length and angle of the upper rear arm we are able to increase or decrease the arc of the rear tire as it travels through its suspension motion. Increasing the camber gain allows the contact patch of the rear tire to stay more parallel to the surface than the stock set-up increasing traction throughout the turn. This allows you to pick up throttle earlier in the corner, or even drive through the corner, increasing the speed through the corner, lowering lap times. Other benefits. Carving Blocks will strengthen and improve wheel hub rigidity. No more bent (stock) turnbuckles. Carving blocks work with both SC hubs and all older style HPI baja hubs. Camber Gain and Racing Camber Gain is mostly associated in racing situations where the upper A arm slopes downward from the ball joint to the frame.When the weight shifts to the outside while going around a corner the vehicle rolls towards the outside of the turn. The weight transfer makes the tires flex under the pressure and weight transfer and therefore the Camber Angle needs to be adjusted to keep the tire patch at it's maximum. The faster you go around a corner the more the tire flexes and the more roll the vehicles will encounter. That means the Camber Angle will need to be changed to as the vehicle rolls more. That is where Camber Gain comes into play.

 

PhatDad. Carving Blocks/Camber gain blocks.

Write a review

Please login or register to review

PhatDad RC Carving Blocks/ Camber gain blocks for the HPI Baja 5B/5T/5SC

  • Brands Phatdad RC
  • Product Code: PD-9 SP527
  • Availability: In Stock
  • £22.99