• Kraken RC Set of 2 Lower Rear A-Arms - White (Dyable)

Kraken RC Set of 2 Lower Rear A-Arms - Dyeable White

 

Kraken RC X2 Arms for HPI Baja 5B, 5T and 5SC
 
*Now discontinued, only a few sets left.
 
Kraken  RC is proud to introduce our arms specially developed for bashers. These arms are made out of a newly developed, cutting edge polymer by Dupont, USA. These arms are super tough and can withstand hard bashing in extreme weather down to -40F/C. Designed to reduce as much as 80% of flex compared to stock and aftermarket arms, these arms are a great alternative to those who like the stiffness of aluminum minus the weight! These arms are covered by Kraken Replacement warranty. Please check our website for further details.
 
Rear Lowers
- Solid arm design. Beefier, stronger, easier to clean and 80% reduction in flex
- Additional inner shock mounting hole allows for a softer suspension setup without a spring change
- Hub is moved forward approximately 8mm and increases dogbone sweep creating more forward traction
- Inner hinge pin is completely covered that keeps hinge pins clean and increases arms strength
- Deeper shock mount screw holes that allows for use of a M4x35mm screw that increases strength and suspension consistency
- Increased shock clearance that allows the use of Big Bore shocks and springs
- Reversible. Can be used on either the left or right side of vehicle
 
 
Rear Uppers
- Solid arm design. Beefier, stronger, easier to clean and 80% reduction in flex
- Arm is angled 2 degrees forward- matches the forward placement of the hub while still clearing the spur gear to create a bind free suspension
- Arm curves down then angles up 8 degrees to match the placement of the outer pivot ball on the hub. Prevents screw head from digging into the ball end at maximum down-travel
- Inner hinge pin is completely covered and keeps hinge pin clean and increases arm strength
- Increased shock clearance that allows the use of Big Bore shocks and springs
- Compatibility with RPM- matches RPM's forward placement of the hub while still clearing the spur gear to create a bind free suspension
 
 
Front Lowers
- Solid arm design. Beefier, stronger, easier to clean and 80% reduction in flex
- Simplified shock mount! No spacers required to mount your rod ends!
- Improved sway bar mounting hole. It is in-line with the sway bar creating less bind
- Increased shock clearance that allows the use of Big Bore shocks and springs
- Reversible. Can be used on either the left or right side of vehicle
 
 
Front Uppers
- Gull Wing design creates clearance for screw head access with a standard allen driver. Looks cool and menacing!
- Pivot Ball attachment angles up 2 degrees to match the placement of the outer pivot ball on the hub. Prevents screw head from digging into the ball end at maximum down travel
- Increased 16mm material around inner hinge pin for maximum strength and durability
- Increased shock clearance that allows the use of Big Bore shocks and springs
- Caster adjustment maintains the stock arms ability to change the vehicles caster to one of three settings. Also allows the installation of an additional brace behind the front for added strength
 

Write a review

Please login or register to review

Kraken RC Set of 2 Lower Rear A-Arms - White (Dyable)

  • Brands Kraken RC
  • Product Code: X2RLAW, X2RLA-WHT
  • Availability: In Stock
  • £23.99